ATS 6-speed Clutch Bleeding Procedure


New Member
I have a 2013 ATS 2.0 Luxury with the 6 speed manual. I just bled my brakes and wanted to bleed the clutch slave cylinder as well. The bleed screw is appears to fully open about 1/2 turn. When I opened it, I got nothing out, even with my pressure bleeder on the master cylinder. I pumped the clutch a few times, and nothing came out. The cover had been on the tap so I'm relatively sure it is clean. Anyone aware of some special bleeding procedure??
My clutch pedal squeaks, and always has. I have lubed it with only short term success. Anybody successfully conquered this issue?

Similar threads